Mehato ea ho ba hlokolosi bakeng sa ho kenya le ho etsa liteko mochini oa mofuta oa hakisi o thunngoa

Thehakisi mofuta thunngoa ho qhomisa e mochinika kakaretso e na le ponahalo e kholo, mme ts'ebetso ea ho kenya e thata ho feta ea lisebelisoa tse nyane. Ho kenya mochini o nepahetseng le mochini oa liteko ke senotlolo sa ho netefatsa ts'ebetso e tloaelehileng ea lisebelisoa tsa morao-rao. Tabeng ea ts'ebetso ea pele e se nang boiphihlelo, basebelisi ba koptjoa ho latela ka tieo litaelo tsa basebetsi ba amehang kapa ho sheba litaelo. Ts'ebetso e sa lumelloang e ka baka tšenyo e ke keng ea lokisoa hohakisi thunngoa ho qhomisa e mochini. Theshot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. Thehakisi mofuta thunngoa ho qhomisa e mochini is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. Theprecautions for the installation and debugging of the relevant components are introduced below.
1. Sesebelisoa sa ho thunya:
Theshot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. Hoist le nsete conveyor:
Pele, etsa liteko tse se nang mojaro ho bona hore na bakete e phahamisang le li-spiral li matha ka tsela e nepahetseng, ebe u tiisa lebanta la hoist ho isa tekanyong e lekanyelitsoeng ho qoba ho kheloha, ebe o etsa tlhahlobo ea mojaro ho lekola Ts'ebetso le matla a fetisisang, hore na ho na le Lerata le ho thothomela ho makatsang, hlahloba le ho tlosa litšitiso.
3. Khaohano ea lehlabathe la pilisi:
Pele hlahloba hore na motsamao oa pheleu e tenyetsehang, 'me joale sheba boemo bo nepahetseng ba poleiti arola, joale ha hoist e imetsoeng le debugged, ho na le tšubuhlellano phallo ea shots tšepe, le hlahloba hore na Shots tšepe li phalla tsoa' me oela ha chute e lokolloa